Winding Automatic Tapping Machine R Shape U Shape with 20mm - 30mm
1. Composition of machine
The machine consists of two parts: straight line segment wrapping
device and annular segment wrapping device.
Straight line segment wrapping device consists of wrapping head,
linear guide rail, body, tailstock, conductor support mechanism and
Annular segment wrapping device consists of wrapping head, arc
guide rail, arc base, hand displace guide rail and control system.
2. Principle of the machine and primary structures
One end of conductor is attached on the tailstock of straight line
segment wrapping device, and the tailstock utilizes buckle clamp
mode, and position can be adjusted according to conductor length.
For the other end, there is conductor bearing at the junction
(angle range 30 ° - 80 °) between annular and straight line for
supporting the weight of the conductor. Up and down can be adjusted
through the motor.
Machine main parameter:
Width 20-30 mm Buyer provides samples when test run
Crepe/craft paper disc
Central spindle: Ф50±2mm External diameter (max):Ф300mm
Welding table as the base frame of rail, linear guide rail is
installed on the base frame
There is supporting stand for the conductor
Straight line part, minimum effective rotating inner diameter 400mm
Annular part, flexible circle winding
Take-off tension, maximum 5kgf
The contact surface of the paper is made of resin, the metal face
of rim must be through surface treatment to prevent rust and metal
powder cannot fall out.
Maximum wrapping rotating speed
Straight line segment Max. 100rpm, arc segment Max. 30rpm(speed is
Stack cover rate
1/2; 1/3 selectable
Taking into account easy to disassembly when moved in
Workplace entrance dimension: 7000(L)×1500(W)×1800H(mm)
AC380 / 50 Hz; Three phases